TPO & Duro-Last Commercial Roofing
Single-ply membrane roofing for flat and low-slope commercial buildings, with reflective surfaces that help reduce cooling costs.
American Legacy Roofing & Exteriors installs and repairs TPO and Duro-Last PVC single-ply roofing systems for commercial buildings across North Houston, Montgomery County, the US-290 corridor, and the Brazos Valley. These reflective membranes are a common choice for flat and low-slope roofs on warehouses, retail centers, offices, and churches.
- Systems
- TPO and Duro-Last PVC
- Roof types
- Flat and low-slope
- Options
- New install or full tear-off and replacement
- Add-ons
- Tapered insulation for ponding water
- Scheduling
- Planned around your business hours
CommercialReliable flat roofs for Texas businesses
Flat and low-slope roofs face a different set of problems than residential roofs. Ponding water, failed seams, and punctures around rooftop equipment are the most common causes of commercial leaks.
TPO (thermoplastic polyolefin) and PVC membranes like Duro-Last are heat-welded at the seams, creating a continuous watertight surface. Their white, reflective surface helps keep roof temperatures and cooling loads down during Texas summers.
Duro-Last is a prefabricated PVC system: much of the membrane is fabricated in a factory to fit your roof, including custom flashings for curbs and penetrations. That can reduce on-site seaming, which is where many flat roofs eventually fail.
Commercial membrane services
Every tpo & duro-last project includes a free inspection, a written estimate, and photo documentation.
TPO installation
Mechanically attached or fully adhered TPO for new and replacement roofs.
Duro-Last PVC systems
Prefabricated membrane with custom-fit flashings for curbs, stacks, and HVAC units.
Full tear-off
We remove the old roof down to the deck, fix any damage, and start the new membrane on a clean, solid base.
Tapered insulation
Re-sloping to move water toward drains and eliminate ponding.
Leak repair
Seam, flashing, and penetration repairs on existing single-ply roofs.
Maintenance plans
Scheduled inspections to catch small problems before they cause interior damage.
TPO vs. Duro-Last PVC
Both are proven single-ply systems. The right one depends on your building, budget, and rooftop exposure.
| TPO | Duro-Last PVC | |
|---|---|---|
| Material | Thermoplastic polyolefin | Polyvinyl chloride |
| Seams | Heat-welded on site | Many seams factory-welded; fewer on-site seams |
| Reflectivity | High (white) | High (white) |
| Chemical & grease resistance | Good | Very good; useful near restaurant exhaust |
| Cost | Typically lower | Typically higher |
Signs your commercial roof needs attention
If you notice any of these, schedule a free inspection before small problems turn into expensive ones.
How our tpo & duro-last process works
Roof survey
Visual inspection, moisture checks, and photos of problem areas.
Proposal
Repair and replacement options with a clear, written scope.
Scheduling
Work planned around your hours and tenants.
Installation
Membrane, flashings, and details installed to manufacturer spec.
Closeout
Final inspection, photos, and warranty documentation.
TPO & Duro-Last done right the first time
- Owner on every jobJoshua Reaves personally inspects, oversees, and walks through every project.
- Photo-documented workYou see photos of the problems we find and the layers we install.
- Written, line-item estimatesEvery material and labor item spelled out before you sign. No pressure.
- Insurance claim helpWe document storm damage and meet your adjuster on the roof.
Joshua Reaves, Owner"We only use the highest quality of materials, install them per industry specs, and I personally follow your project from start to finish, ensuring that your roof is exactly the quality I would want for my own home."
TPO & Duro-Last across Southeast Texas
We provide tpo & duro-last services across North Houston, Montgomery County, the US-290 corridor, the Brazos Valley, and Dallas. Choose your city for local details.
TPO & Duro-Last questions, answered
Straight answers to the questions we hear most. Still unsure? Call or text (979) 310-4851.
More answersWhat is TPO roofing?
TPO is a single-ply thermoplastic membrane used on flat and low-slope roofs. Its seams are heat-welded, and its white surface reflects sunlight to help reduce roof temperatures and cooling costs.
What is the difference between TPO and Duro-Last?
Duro-Last is a PVC membrane system that is largely prefabricated in a factory to fit your roof, which reduces on-site seams. TPO is typically lower in cost and seamed on site. Both are heat-welded single-ply systems.
Can a new TPO roof go over my existing roof?
We don't install new roofs over old ones. Every roof we install starts with a full tear-off down to the deck, so we can find and fix hidden damage and give the new membrane a clean, solid base. If your existing roof is still sound, a roof coating may be a lower-cost way to extend its life.
How do you fix ponding water on a flat roof?
Ponding is usually corrected with tapered insulation that creates slope toward drains, along with drain or scupper improvements.
Will roofing work disrupt my business?
We schedule work around your operating hours whenever possible and keep work areas safe and clean.
Do you repair existing TPO and PVC roofs?
Yes. We repair seams, punctures, and flashing on existing single-ply roofs and can tell you whether repair or replacement is the better long-term value.
Related services
Get a free tpo & duro-last estimate
Tell us about your property and we'll call within one business day to set a time.
- Call(979) 310-4851
- Text(979) 310-4851
- HoursMon–Fri, 8am–8pm
Sat, 8am–2pm




